Home > Products > Road Construction Machinery > Motor Grader Machine

China Big Mining 350HP Motor Grader XCMG Gr3505

Price:

$496,000-$500,000 / EA

1 Unit / EA (Min. Order)

Payment Terms:

Delivery time: 45-60 Days

Shipping: Container Flat Rack Roro

Inquire Now Next Product

Product Description

GR3505 Motor Grader

1. Heavy duty working device.

2. Load sensing hydraulic system.

3. Thermal balance and flow field analysis techniques.

4. Turbocharged cab technology.

5. Fault Diagnosis and GPS Remote Control Technology.

6. The operation of the working device is replaced by two traditional joysticks, which are replaced by two electronically controlled handles, which reduces the driver's speed by 70%.

7. Manual mode: The change of the vehicle speed is realized by manually operating the gearbox position control handle.

8. Automatic mode: The gearbox realizes automatic shifting by detecting information such as engine speed and vehicle speed.

9. Configure the variable power engine and the gearbox of the lockable clutch. The system matching can automatically adjust the engine curve and the gear position and lift according to the “load-vehicle speed change”, so that the machine is always in the “best working state”.

10. The blade is equipped with a floating valve group on the two lifting cylinders. When the pressure of the lifting cylinder is greater than the preset pressure of the floating valve group, the cylinder will automatically adjust the stroke to mitigate the impact.

Picture

China Big Mining 350HP Motor Grader XCMG Gr3505

Specification

Engine Model		CUMMINS QSM11
Rated power/speed		261kW/2100rpm
Overall dimension (standard)		11250x3180x3820
Total weight (standard)		30000 kg
Tire specification		23.5R25
Ground clearance (front axle)		500mm
Tread		2580mm
Space of front and rear axles		7200 mm
Space of middle and rear wheels		1538 mm
Forward velocity		5/8.5/13/20/30/45km/h
Reverse speed		5/13/30km/h
Tractive effort f=0.75		165kN
Maximum gradeability		25%
Tire inflation pressure		320kPa
Working system pressure		25MPa
Transmission pressure		1.3—1.8Mpa
Maximum steering angle of front wheel		±45°
Maximum slant angle of front wheel		±17°
Maximum oscillating angle of front axle		±15°
Maximum oscillating angle of equilibrium box		±15°
Maximum steering angle of frame		±22°
Minimum turning radius		8.9m
Scrape knife	Maximum lift height	450mm
	Maximum cutting depth	500mm
	Maximum tilt angle	65°
	Cutting angle	28°—70°
	Angle of revolution	360°
	Length & chord height	4877x687mm
Coolant		50L
Fuel tank		550L
Engine		37L
Transmission		38L
Balancing box		186L
Drive axle		106L
Hydraulic oil		310L